Posted 20 hours ago

JIS B4633 1/4" Hex Screw Driver Bits | Made in Japan (+1 +2 +3 X 75mm - 6 Pcs)

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

On paper, it differs a lot from Phillips, but in real life, people often confuse the two – which results in damaged screws that can no longer be unscrewed even using a matching screwdriver. I work for a Japanese-based company that manufactures equipment and there are JIS screws all over the place. Les vis JIS sont utilisées sur les fixations industrielles japonaises standard présentes sur les motos et les équipements japonais (comme Honda, les composants de bicyclette Shimano, les voitures radiocommandées Tamiya, etc. Only in America are Phillips screwdrivers immune to what the rest of the world considers to be a proper Phillips screwdriver.

Navega entre una exhaustiva selección en jis screwdriver set y filtra las mejores coincidencias o precio para encontrar el que más te gusta.

Furthermore I could hint at several terms, factors, techniques that are regarded as standard in the US photo world that are completely unknown here. Holders with bits are more heavy and (more important) more bulky at the point than complete screwdrivers. Justo antes de completar tu primer pedido, tómate un momento para comprobar los cupones que tienes, con ellos te ahorrarás aún más en jis screwdriver set.

If your working on Japanese cameras and don't want to bugger the screws you need screw drivers labeled as JIS. Now it is defined only by (DIN) ISO 8764-1 PH (standard designated in 2004) and (DIN) ISO 8764-2 PH. You pull the body down and the bit actually travels down the shaft to fit inside one of the recesses in the body.

Abarcando una amplia gama desde marcas de calidad hasta selecciones más asequibles, estos comentarios te ayudarán a escoger lo mejor en jis screwdriver set, sin importar lo que tengas previsto gastarte. Generally I don't find flank-drive wrenches damaging fasteners if they were properly tightened and not overly corroded.

You might have heard of these, they are also known as “cross-recess”, “cross-head”, or “cross-point”. When stuck with a ruined or loose fitting phillips screw fill the hole with valve grinding compound then insert phillips screwdriver. Zum Einsatz bei Verschraubungen nach japanischem Industriestandard, wie bei japanischen Motorrädern und Maschinen, bei denen handelsübliche PH-Bits Schäden verursachen könnten. But most other manufacturers don’t display JIS anywhere (Vera, Wiha, and even Japanese Hozan, to name a few I looked into in great detail).So if a Phillips driver doesn't fit quite right and the product is Japanese in origin, it's a safe bet that the screw is a JIS. I have been aware for long enouigh of the Phillips/Posidrive devide but not of JIS – still learning at 80! When you have a tight screw particularly steel in aluminium allow, you can hit the back of the screwdriver with a hammer that will usually 'shock' the thread to release it, without damaging the screw head or curf. Explora una amplia gama de lo mejor en jis screwdriver set en AliExpress, ¡y encuentra la que mejor se te ajusta!

Thanks for posting a very informative article on the “cross point screws” and the various screwdrivers along with your recommendations. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). A standard phillips screwdriver does not properly engage the cross-point head on JIS standard cross-point screw heads. I wrote something similar in the reply to a comment on my video about these screwdrivers (see the first, pinned comment and my reply).Based on my experience, I ‘m confident the cross-point screws used on Shimano components have a JIS standard cross-point head. JIS: JIS Ph1, JIS Ph2, JIS Ph3; Kreuzschlitz: Ph0, Ph1, Ph2 (x2), Ph3; Schlitz: 3, 4, 5, 6, 7 mm; Pozidrive: Pz1 (x2), Pz2 (x3), Pz3 (x2); Sechskant: 2, 2,5, 3, 4, 5, 6 mm; Sechsrund: T10, T15, T20, T25, T30, T40. I am just reading that the old JIS standard has been more or less incorporated into some current standard (maybe DIN 5260 or DIN 8764? One difference that I have noticed, between the Vessel and Wiha cross points is the Wiha tool only go down in size to PH000, while Vessel offers 0000.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment